Tag Archives: Electric RC planes

Easy Star RC Plane – Easy to Fly Electric RC Plane

Posted on by
2
Easy Star RTF from Amazon.com (Amazon.com)

Easy Star RTF from Amazon.com

Easy Star RC Plane is easy to fly, very durable and perfect RC aeroplane for beginners.

What makes the Multiplex Easy Star one of the most popular RC Planes?

Why even the most experienced RC hobbyists love this “beginner plane”?

Read on to find out…

Easy Star RC Plane Is Easy to Fly

When an experienced RC hobbyist is asked what is the best RC plane for a beginner, there’s a great chance that Easy Star will be mentioned — and for a good reason.

Easy Star is a great park flyer. It is designed with beginners in mind, so it’s very easy to build and and even easier to fly. It’s considered as one of the top beginner planes and many RC hobbyists have started with this plane.

Easy Star is flown with elevator/rudder and throttle control. It is specifically designed for beginner learning to fly RC aeroplanes. It can handle little more wind than most beginner planes and it also has good gliding ability.

With the gliding abilities, in the right conditions you can find yourself thermal or slope soaring with this one. This in addition to the flying times with a 6-7 cell battery pack gives Easy Star 2-3 hours of flight time.

And what makes Easy Star even more special, is that it’s a plane that many keep on flying for years — so it’s definitely not just a plane for beginners.

Unlike many other beginner, or RTF planes in general, Easy Star is modifiable and more experienced flyers like the fact you can for example put a brushless motor on it and change the other parts too.

Easy Star Is Available as Both RTF and ARF Kit Versions

Easy Star RC Plane can be bought as an RTF version, which is perfect for beginners. The plane is ready to fly in couple of hours (just charge the batteries, attach the wings and you’re ready to go).

The RC transmitter on the RTF version is a lot better than on many other RTF planes as are the parts that come with the plane. The radio in the RTF package can be used to fly other planes too (rare in the cheap RTF packages).

If one is looking to modify the plane from the start or add your own radio gear, it’s great to have the ARF option available. This way you can this great flyer just the way you like it. No painting is required on either the RTF or the ARF version, so the prefabricated and colorful parts is the only thing you need.

The standard motor can’t take 3 cell LiPo, but switching to a 2 cell LiPo battery can be done, which is what many do when putting a brushless motor in (then even a 3-celler might work, depending on the motor, but 2-cell LiPo if often enough).

Common Easy Star modification is to place a brushless motor on it, change the propeller (for example thin 6×4 fits without cutting, larger requires a bit of modification and cutting the frame, but that can be done too).

There has even been Easy Star brushless versions available from some sellers, so there’s a chance you might find an Easy Star with Brushless motor in a RTF package too.

Easy Star Is Built to Last

Easy Star’s motor is placed above the wings! This is perfect for safety and makes the plane a lot more durable than many other beginner planes.

If you hit the ground nose down (which is more likely to happen for a beginner than not), on a standard design there’s a great chance that the motor or the propeller will break on the crash.

With Easy Star, built from long-lasting and durable ELAPOR foam, the motor is safe from such incidents. The clever motor placement and durable design make Easy Star one of the hardest planes to break.

It’s by no means indestructible, but breaking it beyond repair or causing damage that requires purchasing spare parts is a lot harder than with most other planes. ELAPOR foam as a material is easy to repair and get back in the air if something does happen.

Easy Star can be dismantled easily for transportation as the wings come off without special tools (and the box it comes with can be used to keep it with you, if you don’t have a special travel box around).

As the wings are not permanently attached, this also increases the durability as the wings are not hard-mounted, but can give in a bit on impact which reduced the risk of damaging the plane even further.

Easy Star Has a Large Community of Fans

Check out these amazing resources to find out more about the Easy Star RC plane, learn to fly it, see how others have modified it and much more!

Join The FUN and Get Your Own Easy Star RC Plane!

Multiplex, the manufacturer, is based on the US, but being such a popular plane, Easy Star is being sold all around the world.

Easy Star RC plane is one of the most popular beginner planes, together with the Super Cub RTF, and as said – many advanced pilots like it too, so you should be able to find Easy Star from your local shop. Also, Easy Star is available from many online sellers, so you can order the plane quickly and get it delivered to your doorsteps…

To buy your Easy Star RC Plane online, check out these trusted vendors…

Introduction to the Different Electric RC Plane Types

Posted on by
Reply

Most RC plane hobbyists start out with an electric RC plane. The electric RC plane offers an affordable and easy way to start flying radio controlled aeroplanes. The electric RC planes can be categorized in many ways, but in general, there are five kinds of electric RC model planes around:

  • Park Flyers
  • Indoor RC Planes
  • Micro RC Planes
  • RC Glider Planes
  • (Bigger) Electric RC Planes

Park Flyers

Parkflyers' Cessna 182 Pro Deluxe

Park flyers are smaller RC planes that were created to enable flying when there’s not too much space to fly around – like a park.

However, even a park flyer still requires a space equal to a football field for enjoyable flying, so keep that in mind when choosing your plane.

Park flyers are made of various materials, like balsa wood, depron and higher quality materials like EPP or elapor foam. One of the most common models is the Cessna, common plane turned into RC version: Cessna 182 electric RC plane (Cessna models exist in all electric RC plane “classes”, including the smaller park and micro flyers).

Typical park flyer weights less than 1 pound (of slightly more) and has a wing span of 2-3 feet. With the light-weight, the park flyers can’t stand any wind and thus, require calm weather.

Indoor RC Planes

Indoor RC plane is an electric RC plane that is spesifically designed to be flown inside. But not inside your standard house, but bigger halls and buildings like school gymnasiums and indoor sports arenas.

Indoor RC flying is great when the weather conditions would prevent flying outside – wind, rain and freezing weather won’t stop flying. An indoor RC plane weights-in at both sides of a pound and cannot be flown in any kind of wind.

With all indoor planes, it’s recommended to learn the flying basics outside, without the danger of hitting walls (it’s not uncommon for a beginner to fly to the walls or ceiling even in a bigger hall).

Most indoor RC planes are capable of flying outside as well, even the micro planes, as long as there is little to no wind around.

Micro RC Planes

One subcategory of the indoor RC planes are the micro RC planes. Micro RC planes are not as common as micro helicopters for example, but these tiny RC models have grown into a whole new hobby.

Micro RC planes range from cheaper and smaller versions of the bigger electric RC planes to tiny replicas of the WWII fighters and modern jet planes. Micro RC planes require some airspace to be flown around, so even these are not necessarily suitable for a small flat.

Electric RC Glider Planes

Easy Glider Pro In general, RC glider planes have a wing-span over 4-5 feet and weight-in about 3-5 pounds – and because of the nature of the flight, more and less require wind to be flown properly.

Electric RC glider plane refers to a glider or sailplane that has an electric motor. Some refer to all radio controlled glider planes as electric planes as the planes have electric gear in them, even if they don’t come with an electric engine.

All RC glider planes are flown in the same way, utilizing wind and the rising air currents, both thermal and slope lifts. The difference between a pure RC glider and a motored RC glider is the way they are launched.

A pure RC glider is launched by throwing it by hand, towed manually or with another RC plane or with a bungee. The motored electric RC glider is launched and taken into the air with it’s own engine. When the plane has climbed high enough using the engine, the electric engine is cut off through the RC radio transmitter.

The motored electric glider planes have a folding propeller. The propeller works like a normal propeller when carrying the plane to heights and when the throttle is cut, the blades fold back to the fuselage sides. With the propeller folded back, the plane avoids wind drag for the flight.

When the plane has climbed up, engine is cut off and the propeller has folded back, the electric RC glider plane is just like any RC sailplane / glider, and is flown using and trying to find the thermal and slope lifts, just like the real, non-RC glider planes. A 2-3 channel radio controlled glider plane is often referred as the best and easiest option for a beginner to start flying radio controlled aeroplanes.

(Bigger) Electric RC Planes

Easy Star RTFThese are the electric RC planes that are more and less the same as the RC planes with combustion engines. Bigger electric RC planes weight-in anything from couple of pounds up to 10 – with more weight, these heavier electric RC planes can handle a little wind too.

On the 3-10 pounds weight range and packing the modern brushless engines and Li-Po batteries, bigger electric RC planes are more and less equal to the nitro and gas planes (although nitro RC plane fans will of course disagree here).

The required flying area for these larger RC aeroplane models is equal to the combustion engine planes. As a ready-to-fly package, a bigger electric RC plane offers a whole lot of fun as long as there’s enough space to fly around.

The distinction between the park flyer and non-park-flyer varies based on who’s talking and the manufacturer – for example, the Easy Star -plane (the blue-winged one on the picture there) weights about 3 pounds and is sometimes referred as park flyer, which is probably the correct classification, although it does pack some characteristics of the bigger planes.

What Kind of Electric RC Plane Are You Using?

Many RC hobbyists have all kinds of planes, but still one plane or plane type is often the favorite…

Which is your favorite RC model plane type?

Are you into micro RC planes or indoor flyers? Or is flying outside the only true way to go?

Choosing Radio Controlled Aeroplanes for Beginners

Posted on by
3

Someone new to radio controlled aeroplanes, looking for their first radio controlled aeroplane, can get confused because of the wide variety of choices available. In this article, we’ll go through the three RC motor types and look at them from a beginner’s point of view, looking for the best option for one’s first radio controlled aeroplane.

Three Kinds of Power Sources for Radio Controlled Aeroplanes

There are three kinds of power sources for radio controlled aeroplanes. The three kinds of RC engines available are nitro, gas and electric RC planes.

Firstly, the nitro RC engines run on nitro methane mixture, which makes the radio controlled aeroplane using a nitro RC engine fly faster and usually for longer time too. However, nitro RC engines require more maintenance, can break up more easily and the fuel is more costly than the other two options.

Secondly, RC aeroplanes running on gas motors use a mix of gasoline and oil. Gas motored radio controlled aeroplanes are relatively reliable and moderately priced, though still considerably more expensive and higher maintenance than the electric RC planes.

Finally, the electric RC motors. Electric RC planes are the cheapest, yet most reliable RC motor type. Electric RC planes are easy to afford, easy to “fuel” (just charge the batteries) and electric RC motors don’t require the extensive maintenance that the two counterparts do. Thus, electric RC motor is the best, the safest and the smartest choice for a beginning radio controlled aeroplanes hobbyist.

Electric RC Plane, Great Value Radio Controlled Aeroplanes

Electric RC plane is the best bet for a beginner because of the simpler structure and more reliable usage. Electric RC plane is also slow enough for a beginner to learn how to fly radio controlled aeroplanes before moving on to the more advanced models.Super Cub LP RTF Electric RC Plane

When you’re starting out, you should look for an easy flying RC model plane, instead of super-sonic speed RC jet plane. Why? Because faster RC plane is not necessarily more fun, especially for a beginner, because controlling a fast RC plane is a bit trickier and it takes some experience to control them properly.

One of the benefits for choosing an electric RC plane is that there is plenty of ready-to-fly, RTF RC planes available with electric RC motor, which is not the case with nitro- and gas-powered radio controlled aeroplanes. Choosing a RTF RC airplane as a first radio controlled plane, a new RC aviator doesn’t have to learn the secrets of model building, balancing the plane and other, more technical tasks of radio controlled aeroplanes hobby.

Yes, electric RC planes are slower than than the gas- or nitro-powered RC model planes, but that doesn’t mean they’re slow, just that they are more suitable for beginners. Slower speed means more stability and more safety, which again, saves you money..

The Right Kind of Radio Controlled Aeroplanes for Beginners

One thing is still certain, as a beginner, you will crash your radio controlled plane at some point. This means that you should look for a durable model that can take the beating. And in the case of breaking, the spare parts should be reasonably priced and repairing should be simple. The electric RC motor itself doesn’t break easily, which is another benefit of going with electric RC plane..

To summarize, a beginner should look for an electric RC plane that is:

  • ready-to-fly, RTF RC airplane
  • easy to fly
  • durable
  • not too costly

This kind of setup enables a beginner to start training and learning to fly radio controlled aeroplanes right away, offering safer start-up, while keeping the costs at moderation. A beginning RC aircraft hobbyist most likely wants to concentrate on the fun and entertainment and learn how to fly RC aeroplanes – and RTF, electric RC plane enables just that..